Do you want to put in a photo in your quilt that looked much more like area of the fabric than an iron-on decal?
Before, we used photo transfer paper to iron our photo onto our quilt block. Have you ever heard about direct-to-garment printing? It’s a great new way to get your best photo from the scrapbook and onto your quilt block.
Direct-to-garment (DTG) printing is a kind of digital printing. Using a price of about $20,000, it’s not practical to perform out and acquire your own personal DTG printer. The typical price for coffee printer is $8 to $10.
This procedure might be a more expensive than the traditional photo transfer method. That’s partially since the technology is really new. Should you choose to try a DTG photo in your memory quilt block, there are many things to look for when deciding on the printer that will perform the do the job:
1. Make sure you will find no chemicals necessary to pre-treat your fabric first. Some DTG printers create an image that is certainly similar to screen printing. You don’t want that look or feel in your quilt. The ink will probably be hard in addition to the fabric and can eventually (sometimes much earlier than later) will start to crack and wear with washings. Ask your prospective printer to view a sample of something they’ve printed. If you can have the ink is raised higher than the surface in any way whatsoever, it’s probably a sublimation type process which requires chemicals to pre-treat the material.
2. Use a kind of digital DTG printing made available from the Brother GT 541. There are actually no chemicals required to pre-treat the material. The inks bond using the natural fibers and so are heat cured to set the graphic. The inks are water based, that helps leave a soft yet crisp image on your own fabric.
There are several downfalls to using a4 uv printer on your own quilt blocks. One pitfall is color limitations. Since DTG printing is actually a form a digital printing, there is not any white ink. White is the lack of color. Consequently you are unable to print a picture on navy blue or black fabric.
Digital garment or fabric printing is a CMYK format – cyan, magenta, yellow, and black. It is possible to mix those colors to get a full spectrum of accurate colors – hardly white. You can find DTG printers that print white ink, but most of these require chemical pre-treatments for the fabric and can give you that thick surface print.
You must make use of a light colored or neutral fabric and it needs to be cotton or possibly a cotton blend. The material must be capable of withstand 350 degrees for about half a minute. Should you be not 09dexypky with 100 % cotton or a 50/50 blend, ask your printer in case the fabric will work.
Size of your print can be a limitation. Most DTG printers have got a printing field up to 14 inches x 16 inches. For the majority of quilters, that size range won’t be considered a problem.
And speaking of printing fields, here’s a hint. Most direct to garment printer charge for any 14×16 surface. If your blocks allows 2 or 3 photos to suit within that range, you can get all of them printed for the buying price of one. Seek advice from the printer to ascertain if it’s possible with your particular project.
Like the majority of technological advances, the price tag on digital garment (or fabric) printing will most likely decrease over time. Maybe it would be also available on smaller printers for home and personal use. Until then, try to look for a DTG printer for your upcoming photo quilt project. The final results may be like custom fabric, that will be a great touch for the extraordinary quilt!